Bereg Tent Setup & Care Instructions

Setting Up Your Bereg Tent

Before You Go

• Read through these instructions completely

Basic Setup Steps

1. Choose Your Location

• Select level ground away from hazards
• Clear snow, rocks, and debris from the area
• Consider wind direction and proximity to firewood
• Ensure adequate ventilation space around the tent

4. Stake Out Guy Lines (CRITICAL)

• Always stake out all guy lines - this is essential!
• Weather can change quickly; wind can damage an unstaked tent
• Use proper tent stakes suitable for your terrain
• Adjust tension evenly on all sides
• Check and retighten guy lines regularly

5. Install Your Wood Stove

• Position stove on a heat-resistant surface
• Assemble stove pipe sections
• Thread pipe through the stove jack opening
• Ensure pipe extends high enough above tent (check local regulations)
  
• Keep stove away from tent walls

Wood Stove Safety

Essential Safety Rules

• Never leave a burning stove unattended
• Ensure adequate ventilation at all times
• Keep a fire extinguisher or water nearby
• Monitor carbon monoxide levels (use a CO detector)
• Keep flammable items away from the stove
  
• Use dry, seasoned firewood only

Burn Time Tips

• Large stoves provide 5+ hours of smouldering time
• Make sure you have a hot bed of coals in the stove before bed for overnight warmth 
• Adjust air intake to control burn rate
• Keep the pipe clean for optimal draft

Tent Care & Maintenance

During Use

• Keep tent clean and dry
• Brush off snow and or ice before entering
• Ventilate regularly to prevent condensation
• Check guy lines daily and adjust as needed
• Inspect stove pipe connections regularly

After Your Trip

• Dry tent completely before storing (critical!)
• Clean any dirt, soot, or debris
• Inspect for damage and repair if needed
• Store in a cool, dry place
• Never store a damp tent - mold and mildew will develop

Long-Term Storage

• Keep in a temperature-controlled environment
• Avoid direct sunlight during storage
• Check periodically for moisture or pests

Cleaning Your Tent

Regular Cleaning

• Brush off dirt and debris with a soft brush
• Spot clean with mild soap and water
• Rinse thoroughly and air dry completely
• Never use harsh chemicals or detergents

Repairs & Warranty

Minor Repairs

• Small tears can be patched with tent repair tape
  
• Replace damaged guy lines promptly

Warranty Claims

If you experience a defect with your authentic Bereg product:

• Take clear photos showing the defect
• Provide proof of purchase date
• Contact us with details
• Note: Warranty doesn't cover damage from misuse, accidents, or normal wear

Troubleshooting Common Issues

Condensation Inside Tent

• Solution: Increase ventilation, crack a window or door
  
• Avoid cooking inside without proper ventilation

Tent Sides Blowing Inward

• Solution: Stake out all guy lines properly
• Adjust tension to keep walls taut
• Add extra stakes in high wind conditions

Stove Not Drawing Well

• Check for blockages in stove pipe
• Ensure pipe extends high enough above tent 
• Verify adequate air intake 
  

Questions?

Need help with setup, maintenance, or troubleshooting? Contact our team - we're here to ensure you get the most out of your Bereg tent!